Ga door naar hoofdinhoud
Stap 6
Insert a heavy duty spudger or similar prying tool into the gap between the clutch inspection cover and the transmission housing  near where clutch cable enters the housing. Gently pry the clutch inspection cover away from the transmission housing.
  • Insert a heavy duty spudger or similar prying tool into the gap between the clutch inspection cover and the transmission housing near where clutch cable enters the housing.

  • Gently pry the clutch inspection cover away from the transmission housing.

  • The clutch cover spring may fall out. Be sure to keep track of this and re-install it before replacing the clutch inspection cover.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.