Ga door naar hoofdinhoud
Stap 5
Using a T27 screwdriver bit, remove the four screws holding the clutch inspection cover in place. Using a T27 screwdriver bit, remove the four screws holding the clutch inspection cover in place.
Removing the Clutch Inspection Cover
  • Using a T27 screwdriver bit, remove the four screws holding the clutch inspection cover in place.

Usando una chiave Torx T27, rimuovi le quattro viti che tengono il carter d'ispezione della frizione in posizione.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.