Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Engels
Nederlands
Stap 2
Using a 5/32 Hex or Allen screwdriver, unscrew the two screws from the primary chain inspection cover. Your inspection cover may not be round, depending on the year. However, it will be in the same location and secured by similar screws. Remove the primary chain inspection cover from the transmission housing.
Removing the Primary Chain Inspection Cover
  • Using a 5/32 Hex or Allen screwdriver, unscrew the two screws from the primary chain inspection cover.

  • Your inspection cover may not be round, depending on the year. However, it will be in the same location and secured by similar screws.

  • Remove the primary chain inspection cover from the transmission housing.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.