Ga door naar hoofdinhoud
Engels
Nederlands

Stap 12 vertalen

Stap 12
Using a heat gun, carefully loosen the adhesive connecting the digitizer to its plastic border. Gently peel the digitizer away from the plastic border. When installing the new one digitizer, press firmly around the edges.
  • Using a heat gun, carefully loosen the adhesive connecting the digitizer to its plastic border.

  • Gently peel the digitizer away from the plastic border.

  • When installing the new one digitizer, press firmly around the edges.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.