Ga door naar hoofdinhoud

Retina MacBook 2016 Teardown

Engels
Nederlands
Stap 6
Retina MacBook 2016 Teardown: stap 0, afbeelding 1 van 2 Retina MacBook 2016 Teardown: stap 0, afbeelding 2 van 2
  • And at the other end of the MacBook, it seems the USB-C hardware has also changed. The cable is now perma-fixed to the USB board, condensing the two components into a single unit.

  • ...Also, the silicon is new and moved from the cable itself to the USB board. Here's a comparison of the new USB-C hardware (top) with that of the 2015 Retina MacBook (bottom).

  • Parade Technologies PS8741A (likely an iteration of the PS8740 USB-C redriving switch)

  • Diodes Incorporated PI1EQX7502 USB 3.0 redriver (likely)

  • NXP Semiconductor CBTL04043A1 4-Ch. bidirectional crossbar switch

  • This new USB and cable arrangement is one thing that's not compatible with previous Retina MacBooks.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.