Ga door naar hoofdinhoud
Engels
Nederlands
Stap 36
Use a pair of wire cutters to remove about an inch of the positive terminal surface mount lead. Bend the lead around and through the positive ring terminal on the battery compartment. Use your now perfected through-hole soldering skills to solder the lead to the battery terminal.
  • Use a pair of wire cutters to remove about an inch of the positive terminal surface mount lead.

  • Bend the lead around and through the positive ring terminal on the battery compartment.

  • Use your now perfected through-hole soldering skills to solder the lead to the battery terminal.

  • Cut off any excess lead.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.