Ga door naar hoofdinhoud
Engels
Nederlands
Stap 34
Place a 5.5 mm nut driver or socket over one of the battery compartment screw nuts. Turn the circuit board over. Use one hand to hold the socket in place and tighten the battery compartment screw with a Phillips #2 screwdriver.
  • Place a 5.5 mm nut driver or socket over one of the battery compartment screw nuts.

  • Turn the circuit board over.

  • Use one hand to hold the socket in place and tighten the battery compartment screw with a Phillips #2 screwdriver.

  • Follow the same procedure to tighten the other battery compartment screw.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.