Ga door naar hoofdinhoud
Engels
Nederlands
Stap 13
Remove 4 screws apiece from the main circuit board, and the circuit board for the power supply. Once the pump and those boards are removed, you can access the 4 screws attaching the deck to the heat sinks and reservoir. Once the pump and those boards are removed, you can access the 4 screws attaching the deck to the heat sinks and reservoir.
Detach circuit boards
  • Remove 4 screws apiece from the main circuit board, and the circuit board for the power supply.

  • Once the pump and those boards are removed, you can access the 4 screws attaching the deck to the heat sinks and reservoir.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.