Ga door naar hoofdinhoud
Engels
Nederlands

Stap 7 vertalen

Stap 7
You will insert the new card. Push the side opposite to the latch in first, being sure that the notch in the connector matches the location on the ram card. If these do not fit, DO NOT FORCE THE CARD IN. Rotate the card and try again. Insert at a ~45 degree angle and push straight down into the socket, being sure that the latch clicks.
  • You will insert the new card. Push the side opposite to the latch in first, being sure that the notch in the connector matches the location on the ram card. If these do not fit, DO NOT FORCE THE CARD IN. Rotate the card and try again. Insert at a ~45 degree angle and push straight down into the socket, being sure that the latch clicks.

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.