Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Stap 1 vertalen

Stap 1
Use a pair of tweezers to pull the vibrator motor straight up and out of its recess in the rear case.
  • Use a pair of tweezers to pull the vibrator motor straight up and out of its recess in the rear case.

  • The vibrator motor is still attached to the USB connector board, so be careful not to put too much strain on its delicate cables.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.