Repareer je spullen Gemeenschap Winkel

更换iPhone 3G相机

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Terug naar de handleiding
Engels
Chinees
Stap 2
iPhone 3G Camera Replacement: stap 0, afbeelding 1 van 1

  • Remove the metal handle from the suction cup. It's easier and safer to grip the suction cup's base instead of the metal handle.

  • There is a rubber gasket between the silver front bezel and black display assembly. A bit of force is required in this step to separate the iPhone's display assembly.

  • Be very careful when opening the iPhone so that the cables under the display are not severed.

  • Use a small suction cup near the Home button to gently pull up the bottom portion of the iPhone's display assembly.

  • If the display assembly is to damaged to allow the suction cup to adhere, tape with a strong adhesive such as duct tape maybe used.

从吸盘上取下金属环。 抓住吸盘底座更容易，更安全。

银色前面板和黑色显示屏组件之间有一个橡胶垫圈。 在这一步中需要一点力量来分离iPhone的显示器。

打开iPhone时要格外小心，以免显示器下方的电缆被切断。

使用吸盘轻轻拉起iPhone显示屏底部。

如果屏幕破损以至于吸盘不能吸附，可以使用胶带。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.