Ga door naar hoofdinhoud

Fix Your Stuff

Right to Repair

Parts & Tools

Stap 7
Finishing off the connector with heat shrink and hot glue. I first covered the hole with a piece of scotch tape with a slot cut in it. The connector is pushed through and hot glue is applied around the connector so it conforms to the outside of the Kindle. The tape prevents the glue from sticking to the Kindle and allows you to remove the connector.
  • Finishing off the connector with heat shrink and hot glue.

  • I first covered the hole with a piece of scotch tape with a slot cut in it. The connector is pushed through and hot glue is applied around the connector so it conforms to the outside of the Kindle.

  • The tape prevents the glue from sticking to the Kindle and allows you to remove the connector.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.