Ga door naar hoofdinhoud
Engels
Nederlands
Stap 5
There is a small circuit board attached to the top part of the case for buttons and display readout.  It is connected to the main circuit board on the unit by a small cable. Unhook connector this small ribbon cable from the main circuit bord on the bottom of the unit (which is now facing you.)
Remove connection to top of case
  • There is a small circuit board attached to the top part of the case for buttons and display readout. It is connected to the main circuit board on the unit by a small cable.

  • Unhook connector this small ribbon cable from the main circuit bord on the bottom of the unit (which is now facing you.)

  • The connector should pull out without needing to be released in any way.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.