Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Stap 2
Unscrew 2 3.35mm phillips head screws from the face of the green circuit board using a #00 phillips head screwdriver. Caution: Do not tug on the circuit board. This will tear the ribbon connecting the circuit board to the body of the camera.
  • Unscrew 2 3.35mm phillips head screws from the face of the green circuit board using a #00 phillips head screwdriver.

  • Caution: Do not tug on the circuit board. This will tear the ribbon connecting the circuit board to the body of the camera.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.