Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Stap 1 vertalen

Stap 1
Remove two 4.35mm phillips head screws from around the LCD screen using a #00 phillips head screwdriver. Caution: Do not tug on the LCD screen. This will tear the ribbon connecting the LCD screen to the body of the camera. Loosen the black ribbon clamp using an iPod opening tool
  • Remove two 4.35mm phillips head screws from around the LCD screen using a #00 phillips head screwdriver.

  • Caution: Do not tug on the LCD screen. This will tear the ribbon connecting the LCD screen to the body of the camera.

  • Loosen the black ribbon clamp using an iPod opening tool

  • Release the LCD screen by removing the ribbon from the body of the camera.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.