Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Engels
Nederlands
Stap 10
Flip the box over and pull the solar panel up off the back of the box to access the back of the box, making sure the wires stay tightly pulled from the inside. Assemble the glue gun based on the instructions that are included with the gun.
Gluing the Box to the Solar Panel
  • Flip the box over and pull the solar panel up off the back of the box to access the back of the box, making sure the wires stay tightly pulled from the inside.

  • Assemble the glue gun based on the instructions that are included with the gun.

  • The box is made of polypropolene which is a very challenging material to glue. There are other glues that could be used, but this glue works very well.

  • Glue the hole where the solar panel wires are strung to the inside of the box closed.

  • Inject the glue in quarter-sized circles on the outside edges of the box. 6 spots of glue should suffice.

  • Pull the panel down over the glue making sure it is centered on the box.

  • Let the glue dry for 24 hours before continuing.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.