Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Engels
Nederlands
Stap 7
String heat shrink tubing on the wire of the voltage regulator using heat shrink that is 1/4" to 1/8". Bring the voltage regulator wires to the solar panel wires and prepare to solder. Make sure you solder red to red and black to black.
Soldering the Voltage Regulator and Solar Panel
  • String heat shrink tubing on the wire of the voltage regulator using heat shrink that is 1/4" to 1/8".

  • Bring the voltage regulator wires to the solar panel wires and prepare to solder.

  • Make sure you solder red to red and black to black.

  • Make sure to solder on top of a scrap piece of wood or other material. Do not solder over the open box in case solder drips down into the box.

  • For instructions on how to solder please visit: Soldering Skills

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.