Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Engels
Nederlands
Stap 5
If the solar panel comes with some form of attachment, the attachment to the  wires will need to be cut off leaving 10-12 inches of wire still attached. This step will change depending on the type of solar panel used String the wires through from the back of the panel through the hole on the outside of the box
Solar Panel Wire Cutting
  • If the solar panel comes with some form of attachment, the attachment to the wires will need to be cut off leaving 10-12 inches of wire still attached.

  • This step will change depending on the type of solar panel used

  • String the wires through from the back of the panel through the hole on the outside of the box

  • Make sure the light-catching side of the solar panel is exposed when the box is closed and placed face down

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.