Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Engels
Nederlands
Stap 3
There are two insulated copper wires inside the outer wire jacket, so two different types of wire stripping must occur First, the outer jacket of the wire must be stripped. Keep in mind that there are two smaller wires on the inside Be gentle with this first  wire strip and only pull off the outer wire jacket.
Wire Stripping the Voltage Regulator Outer Jacket
  • There are two insulated copper wires inside the outer wire jacket, so two different types of wire stripping must occur

  • First, the outer jacket of the wire must be stripped. Keep in mind that there are two smaller wires on the inside

  • Be gentle with this first wire strip and only pull off the outer wire jacket.

  • Strip about an inch of the outer wire jacket off of the wire.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.