Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Engels
Nederlands

Stap 1 vertalen

Stap 1
Make sure to drill on a drilling surface. Open the clear plastic box and place face down on a drill-able surface. From the back of the box, drill through the indented ridge about 6 cm down from the short edge of the box with about a quarter inch drill bit.
Box Prep
  • Make sure to drill on a drilling surface.

  • Open the clear plastic box and place face down on a drill-able surface.

  • From the back of the box, drill through the indented ridge about 6 cm down from the short edge of the box with about a quarter inch drill bit.

  • Ensure the drill bit goes through to the other side so that the hole is the same size from the front and from the back.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.