Ga door naar hoofdinhoud
Engels
Nederlands

Stap 2 vertalen

Stap 2
Disconnect the device from the mains voltage. You will also appreciate to remove the water container. Remove the capsule holder. Close the lid (as if you were to make a brew)
Examine, clean or replace the Capsule Piercing Plate and enjoy
  • Disconnect the device from the mains voltage. You will also appreciate to remove the water container.

  • Remove the capsule holder.

  • Close the lid (as if you were to make a brew)

  • Insert the small screwdriver at the point shown by the red arrow, press the screwdriver inwards 2->3 mm and the plate should drop down. There is a small spring behind which is moved. The spring sits on the plate. Due to lots of calcium deposits the plate may need a little help to come down.

  • Insert the new or cleaned plate, latch backend first and click in place in the front.

  • Once done, connect the device and make your self a brew and see if it is well-deserved. No Leaks - You've earned it. Leaks = You need that cup to ponder where the issue then is :-)

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.