Skip to main content

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 22 handleidingen die deze stap bevatten.

Step 5
Make sure the battery is disconnected before you disconnect or reconnect the cable in this step. Disconnect the display cable by prying it straight up from its socket on the logic board.
  • Make sure the battery is disconnected before you disconnect or reconnect the cable in this step.

  • Disconnect the display cable by prying it straight up from its socket on the logic board.

Löse mit dem flachen Ende eines Spudgers oder einem Fingernagel den Stecker des Displaydatenkabels von seinem Anschluss vom Logic Board, indem du es gerade nach oben hebelst.

[* black] Use the flat end of a spudger, or a fingernail, toicon_caution] Make sure the battery is disconnected before you disconnect or reconnect the cable in this step.
[* black] Disconnect
the display data cable by prying it straight up from its socket on the logic board.
[* black] Use the flat end of a spudger, or a fingernail, toicon_caution] Make sure the battery is disconnected before you disconnect or reconnect the cable in this step.
[* black] Disconnect
the display data cable by prying it straight up from its socket on the logic board.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.