Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt nu een vooraf vereiste handleiding van de handleiding die je net bekeek. Alle wijzigingen die je hierin maakt, beïnvloeden alle 24 handleidingen die deze stap bevatten.

Stap 1 vertalen

Stap 1
Remove two Phillips screws securing the battery connector bracket, of the following lengths:
  • Remove two Phillips screws securing the battery connector bracket, of the following lengths:

  • One 2.9 mm screw

  • One 2.2 mm screw

  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your iPhone.

Entferne die beiden folgenden Kreuzschlitz Schrauben von der Kabelabdeckung des Akkuanschlusses.

Eine 2,9 mm Schraube

Eine 2,2 mm Schraube

[* black] Remove the twotwo Phillips screws securing the battery connector bracketbracket, of the following lengths:
[* black] Remove the twotwo Phillips screws securing the battery connector bracketbracket, of the following lengths:
[* red] One 2.9 mm screw
[* orange] One 2.2 mm screw
[* icon_note] Throughout this repair, [product|IF145-167-4|keep track of each screw|new_window=true] and make sure it goes back exactly where it came from to avoid damaging your iPhone.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.