Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Stap 10 vertalen

Stap 10
Remove the Lightning connector assembly. If your replacement part did not come with a headphone jack gasket, use tweezers to remove the gasket from the old part and transfer it to the replacement part. Before re-installation, use a spudger to scour any remaining adhesive residue from the rear case. You can use high concentration isopropyl alcohol to help with the process.
  • Remove the Lightning connector assembly.

  • If your replacement part did not come with a headphone jack gasket, use tweezers to remove the gasket from the old part and transfer it to the replacement part.

  • Before re-installation, use a spudger to scour any remaining adhesive residue from the rear case. You can use high concentration isopropyl alcohol to help with the process.

Rimuovi il gruppo della presa Lightning.

Se la tua componente di ricambio non include la guarnizione della presa jack, usa le pinzette per rimuovere la guarnizione dalla parte originale e per trasferirla su quella nuova.

Prima del rimontaggio, usa uno spudger per rimuovere tutto l'adesivo rimasto sulla copertura posteriore. Puoi usare dell'alcool isopropilico ad alta concentrazione per aiutarti nella pulizia.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.