Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Stap 10 vertalen

Stap 10
Remove the Lightning connector assembly. If your replacement part did not come with a headphone jack gasket, use tweezers to remove the gasket from the old part and transfer it to the replacement part. Before re-installation, use a spudger to scour any remaining adhesive residue from the rear case. You can use high concentration isopropyl alcohol to help with the process.
  • Remove the Lightning connector assembly.

  • If your replacement part did not come with a headphone jack gasket, use tweezers to remove the gasket from the old part and transfer it to the replacement part.

  • Before re-installation, use a spudger to scour any remaining adhesive residue from the rear case. You can use high concentration isopropyl alcohol to help with the process.

Avec l'extrémité pointue d'une spatule (spudger), poussez la prise Jack de 3,5 mm hors de son emplacement dans la coque arrière.

-[* black] Use the pointed tip of a spudger to nudge the 3.5 mm headphone jack from its housing in the rear case.
+[* black] Remove the Lightning connector assembly.
+[* icon_note] If your replacement part did not come with a [https://d3nevzfk7ii3be.cloudfront.net/igi/XBrYVHBxXx3UmHMn|headphone jack gasket|new_window=true], use tweezers to remove the gasket from the old part and transfer it to the replacement part.
+[* icon_reminder] Before re-installation, use a spudger to scour any remaining adhesive residue from the rear case. You can use high concentration isopropyl alcohol to help with the process.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.