Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Stap 10 vertalen

Stap 10
Remove the Lightning connector assembly. If your replacement part did not come with a headphone jack gasket, use tweezers to remove the gasket from the old part and transfer it to the replacement part. Before re-installation, use a spudger to scour any remaining adhesive residue from the rear case. You can use high concentration isopropyl alcohol to help with the process.
  • Remove the Lightning connector assembly.

  • If your replacement part did not come with a headphone jack gasket, use tweezers to remove the gasket from the old part and transfer it to the replacement part.

  • Before re-installation, use a spudger to scour any remaining adhesive residue from the rear case. You can use high concentration isopropyl alcohol to help with the process.

Quita el ensamble del conector Lightning.

Si tu pieza de repuesto no incluye un headphone jack gasket, usa unas pinzas para quitar la junta de la pieza vieja y transfiérela a la pieza de repuesto.

Antes de volver a instalarla, usa un spudger para limpiar cualquier resto de adhesivo de la carcasa posterior. Puedes usar alcohol isopropílico de alta concentración para agilizar el proceso.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.