Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 3 handleidingen die deze stap bevatten.

Stap 3
Locate the four screws (9.52 x 3.43 mm) on the outer rim of the metal cover. Remove the screws using a PH 2 screwdriver. Next, unscrew the four cover screws (11.91 x 2.89 mm) located at the corners of the metal cover using the PH 2 screwdriver.
  • Locate the four screws (9.52 x 3.43 mm) on the outer rim of the metal cover. Remove the screws using a PH 2 screwdriver.

  • Next, unscrew the four cover screws (11.91 x 2.89 mm) located at the corners of the metal cover using the PH 2 screwdriver.

À l'aide du tournevis PH 2, retirez les quatre vis de rebord (9,52 x 3,43 mm) situées sur le rebord extérieur du couvercle en métal.

Ensuite, dévisser les quatre vis du couvercle (11,91 x 2,89 mm) à l’aide du tournevis PH 2.

-[* red] With the PH 2 screw driver, remove the four rim screws (9.52 x 3.43 mm) located on the outer rim of the metal cover.
-[* green] Next, unscrew the four cover screws (11.91 x 2.89 mm) using the PH 2 screwdriver.
+[* red] Locate the four screws (9.52 x 3.43 mm) on the outer rim of the metal cover. Remove the screws using a PH 2 screwdriver.
+[* green] Next, unscrew the four cover screws (11.91 x 2.89 mm) located at the corners of the metal cover using the PH 2 screwdriver.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.