Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 3 handleidingen die deze stap bevatten.

Stap 2
Locate the eighteen  (5.25 x 4.43 mm) screws around the edge of the backplate. Remove the screws using the Hex key. Gently lift the backplate off of the display. Completely remove the backplate and set it aside.
  • Locate the eighteen (5.25 x 4.43 mm) screws around the edge of the backplate. Remove the screws using the Hex key.

  • Gently lift the backplate off of the display.

  • Completely remove the backplate and set it aside.

Localisez et retirez les vis de la plaque arrière (5,25 x 4,43 mm) à l'aide du tournevis PH 2.

Soulevez la plaque arrière de l'écran.

Retirez complètement la plaque arrière et mettez-la de côté.

-[* red] Locate and remove the back plate screws (5.25 x 4.43 mm) using the PH 2 screw driver.
-[* black] Lift the back plate off of the display.
-[* black] Completely remove the back plate and set it aside.
+[* red] Locate the eighteen (5.25 x 4.43 mm) screws around the edge of the backplate. Remove the screws using the Hex key.
+[* black] Gently lift the backplate off of the display.
+[* black] Completely remove the backplate and set it aside.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.