Ga door naar hoofdinhoud
Engels
Nederlands
Stap 2
Remove the three screws with a T-9 screwdriver. (One screw is behind a small black capacitor. Its location is indicated by a yellow box as are the two uncovered screws.) Remove the cables and ribbon cables by pulling them free. They attach the motherboard to the printer and are indicated by red boxes. Remove the cables and ribbon cables by pulling them free. They attach the motherboard to the printer and are indicated by red boxes.
  • Remove the three screws with a T-9 screwdriver. (One screw is behind a small black capacitor. Its location is indicated by a yellow box as are the two uncovered screws.)

  • Remove the cables and ribbon cables by pulling them free. They attach the motherboard to the printer and are indicated by red boxes.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.