Repareer je spullen Gemeenschap Winkel

Tracking Device Teardown

Terug naar de handleiding
Engels
Nederlands
Stap 8
Tracking Device Teardown: stap 0, afbeelding 1 van 2 Tracking Device Teardown: stap 0, afbeelding 2 van 2

  • The module providing the GPS signal processing on this device is a ยต-blox GPS-MS1 that's sort of ancient in the realm of modern electronics.

  • It was released June 29, 1999!

  • It features an astonishing 0.125 MB of SRAM and 1 MB of flash memory.

  • The backup battery on its reverse side powers a real time clock and maintains the GPS receiver's SRAM to allow for a much faster connection time to the satellites, called a warm start. This is usually used in conjunction with a circuit to power down most of the GPS, providing a much longer battery life.

  • The slightly imperfect alignment of the SMD components on the board indicates that the FBI hand-soldered them to the board and tailored the component choices to their specifications.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.