Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Stap 1 vertalen

Stap 1
Use a spudger to carefully pry the silver metal bracket off the left side of the optical drive. Be careful not to bend the bracket, as it is very thin and bends easily. If the bracket doesn't come free easily, heating the adhesive may make prying the bracket off easier.
  • Use a spudger to carefully pry the silver metal bracket off the left side of the optical drive. Be careful not to bend the bracket, as it is very thin and bends easily. If the bracket doesn't come free easily, heating the adhesive may make prying the bracket off easier.

Usa uno spudger per staccare delicatamente la staffa in metallo argentato dal lato sinistro del disco ottico. Stai attento non piegare la staffa, perché è molto sottile e si piega facilmente. Se la staffa non viene via facilmente, puoi riscaldare l'adesivo per agevolare l'operazione di distacco.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.