Ga door naar hoofdinhoud

Stap 1 vertalen

Stap 1
The following steps are only necessary if your replacement Wii DVD drive does not include the four rubber grommets along the front and rear of the DVD drive housing. Insert the tip of a long, skinny screwdriver into the hole in the center of the first grommet on the rear of the DVD drive housing. Pull the grommet straight away from the DVD drive housing until it is free.
  • The following steps are only necessary if your replacement Wii DVD drive does not include the four rubber grommets along the front and rear of the DVD drive housing.

  • Insert the tip of a long, skinny screwdriver into the hole in the center of the first grommet on the rear of the DVD drive housing.

  • Pull the grommet straight away from the DVD drive housing until it is free.

お持ちのWiiの内蔵DVDドライブの正面と背面に沿って4つの「はと目金」が付けられていない場合は、次の手順を割愛してください。

細長いドライバーを内蔵DVDドライブの背面に付けられた一番最初の「はと目金」中央の穴に差し込みます。

完全に取れるまで、はと目金を内蔵DVDドライブから引っ張ります。

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.