Ga door naar hoofdinhoud
Engels
Nederlands

Stap 1 vertalen

Stap 1
You should see eight screws.  Each screw should have a corresponding number under it. Unscrew each screw in with PH 1 Screw driver in numerical order.  The screws will not come all the way out.  Rotating the screw four to five times should make it loose enough to proceed. These are PM 2.0x11.0
  • You should see eight screws. Each screw should have a corresponding number under it.

  • Unscrew each screw in with PH 1 Screw driver in numerical order. The screws will not come all the way out. Rotating the screw four to five times should make it loose enough to proceed. These are PM 2.0x11.0

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.