Ga door naar hoofdinhoud

MacBook Pro 13" Unibody Early 2011 MagSafe DC-In Board Replacement

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 2 handleidingen die deze stap bevatten.

Stap 1 vertalen

Engels
Nederlands
Stap 1
MacBook Pro 13" Unibody Early 2011 MagSafe DC-In Board Replacement: stap 0, afbeelding 1 van 1
  • Pull the MagSafe DC-In board cable toward the heat sink to disconnect it from the logic board.

  • Do not pull upwards. Pulling the connector upwards may break the socket from the logic board.

  • Remove the MagSafe DC-In board.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.