Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 2 handleidingen die deze stap bevatten.

Engels
Nederlands
Stap 3
Gently pull the battery adhesive tabs away from the battery, toward the bottom of the iPhone. To avoid tearing the adhesive strip, be careful not to pull against the battery or lower components. Pull steadily, maintaining constant tension on the strips as they slip out from between the battery and the rear case. For best results, pull the strips at a 60º angle or less.
  • Gently pull the battery adhesive tabs away from the battery, toward the bottom of the iPhone.

  • To avoid tearing the adhesive strip, be careful not to pull against the battery or lower components.

  • Pull steadily, maintaining constant tension on the strips as they slip out from between the battery and the rear case. For best results, pull the strips at a 60º angle or less.

  • The strips will stretch to many times their original length. Continue pulling and re-grab the strips near the battery if necessary.

  • Hold down the battery with one hand as you pull, or the elastic strips may fling the battery from the phone once they're separated from the rear case.

  • If the adhesive breaks off underneath the battery and can't be retrieved, refer to the previous step for instructions on how to unstick the battery. See the next step for additional methods.

Trek de kleefstrips voorzichtig weg van de batterij, in de richting van de onderkant van de iPhone.

Om te voorkomen dat je de kleefstrip laat scheuren, moet je erop letten dat je de strips niet langs de batterij of andere onderdelen trekt.

Trek met een stevige, constante kracht en houd constante druk op de strips als deze loskomen tussen de batterij en de achterste behuizing. Voor het beste resultaat trek je de strips in een hoek van ongeveer 60 graden of minder.

De strips zullen een vele malen hun lengte langer worden dan de originele lengte. Ga verder met trekken en zorg dat je de strips telkens dicht bij de batterij herpakt.

Houd de batterij vast met een hand tijdens het trekken om zo te voorkomen dat de batterij plotseling los schiet en wegvliegt als deze los komt.

[* black] Gently pull the battery adhesive tabs away from the battery, toward the bottom of the iPhone.
[* icon_caution] To avoid tearing the adhesive strip, be careful not to pull against the battery or lower components.
[* black] Pull steadily, maintaining constant tension on the strips as they slip out from between the battery and the rear case. For best results, pull the strips at a 60º angle or less.
[* icon_note] The strips will stretch to ''many'' times their original length. Continue pulling and re-grab the strips near the battery if necessary.
[* icon_caution] Hold down the battery with one hand as you pull, or the elastic strips may fling the battery from the phone once they're separated from the rear case.
+[* icon_note] If the adhesive breaks off underneath the battery and can't be retrieved, refer to ***the previous step*** for instructions on how to unstick the battery. See ***the next step*** for additional methods.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.