Ga door naar hoofdinhoud

Stap 9 vertalen

Stap 9
Place the ignition coil and dust boot back over the spark plug by pushing down and twisting it into place. Reconnect the ignition coil electrical connector by snapping it back into place.
  • Place the ignition coil and dust boot back over the spark plug by pushing down and twisting it into place.

  • Reconnect the ignition coil electrical connector by snapping it back into place.

  • After installing your new spark plugs, compare the old ones to a spark plug wear chart to determine if there are any issues with the way your engine is running. A similar chart can be found in the back of all Haynes repair manuals.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.