Ga door naar hoofdinhoud
Stap 2
Remove the ignition coil electrical connector by first depressing the plastic tab on top of the connector. Pull the connector straight away from the ignition coil to detach it. Repeat this procedure for the remaining three ignition coils.
  • Remove the ignition coil electrical connector by first depressing the plastic tab on top of the connector.

  • Pull the connector straight away from the ignition coil to detach it.

  • Repeat this procedure for the remaining three ignition coils.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.