Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 24 handleidingen die deze stap bevatten.

Stap 11 vertalen

Stap 11
Gently grasp the display assembly and lift it up to open the phone, using the clips at the top of the front panel as a hinge. Open the display to about a 90º angle, and lean it against something to keep it propped up while you're working on the phone. Don't open the display more than 90º—it is still connected to the top of the phone by the display, digitizer, and front camera cables which can tear easily.
  • Gently grasp the display assembly and lift it up to open the phone, using the clips at the top of the front panel as a hinge.

  • Open the display to about a 90º angle, and lean it against something to keep it propped up while you're working on the phone.

  • Don't open the display more than 90º—it is still connected to the top of the phone by the display, digitizer, and front camera cables which can tear easily.

  • Add a rubber band to keep the display securely in place while you work. This prevents undue strain on the display cables.

  • In a pinch, you can use an unopened canned beverage to support the display.

以屏幕顶端为支点,将屏幕缓缓地向上掀起。

将屏幕掀至约90º竖起, 并且在你操作的时候找个东西支撑着它。

請勿將屏幕掀开超过90º, 因为屏幕上还有3条排线连接, 如果掀开角度过大, 可能造成排线损坏。

用橡皮筋将前面板与支撑物固定住。这可以避免拉扯到显示排线。

若在紧要关头时, 你也可以用未开过的罐装饮料撑着屏幕, 这也是可行方法。

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.