Ga door naar hoofdinhoud

iPhone 4 Verizon Logic Board Replacement

Waarschuwing: Je bewerkt nu een vooraf vereiste handleiding van de handleiding die je net bekeek. Alle wijzigingen die je hierin maakt, beïnvloeden alle 10 handleidingen die deze stap bevatten.

Engels
Nederlands
Stap 4
iPhone 4 Verizon Logic Board Replacement: stap 0, afbeelding 1 van 1
  • Use the edge of a plastic opening tool to disconnect the Wi-Fi antenna cable connector from the logic board.

  • When reconnecting the wifi ribbon connector to the mother board be VERY certain that the round connector at the end of the ribbon cable is centered on its mating half on the motherboard before applying pressure. Failure to do so will likely destroy both halves of the connection.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.