Ga door naar hoofdinhoud
Engels
Nederlands
Stap 21
Solder the two metal joints back to the logic board. Place the tip of the soldering iron against the metal joint.
  • Solder the two metal joints back to the logic board.

  • Place the tip of the soldering iron against the metal joint.

  • Melt solder so that it forms a dome on top of the joint.

  • Remove both the solder and the soldering iron tip from the solder pad as soon as enough solder melts onto the pad.

  • When complete, the soldered pads should have an ovular, pill like shape.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.