Ga door naar hoofdinhoud
Stap 14
Remove the frame on the back side of the camera where the LCD screen was. Remove the two screws connecting the frame with the camera.
  • Remove the frame on the back side of the camera where the LCD screen was.

  • Remove the two screws connecting the frame with the camera.

  • Slowly pry off the frame from the camera.

  • After removing the frame a plastic piece with two yellow button connections should fall off.

  • Note: This plastic piece is soldered to two wires a yellow and orange one.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.