Ga door naar hoofdinhoud
Stap 9
Slide a third card underneath the top edge of the battery, on the right side. Carefully maneuver the card past the upper component cables so as not to damage them.
  • Slide a third card underneath the top edge of the battery, on the right side.

  • Carefully maneuver the card past the upper component cables so as not to damage them.

  • Push the card in as far as it will go, breaking through as much of the adhesive underneath the battery as you can.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.