Ga door naar hoofdinhoud

Solo Reemplazo del Vidrio Digitalizador del Apple Watch de 42 mm

Stap 6
Apple Watch 42mm Glass Digitizer Only Replacement, Further removal of the AMOLED: stap 0, afbeelding 1 van 3 Apple Watch 42mm Glass Digitizer Only Replacement, Further removal of the AMOLED: stap 0, afbeelding 2 van 3 Apple Watch 42mm Glass Digitizer Only Replacement, Further removal of the AMOLED: stap 0, afbeelding 3 van 3
Further removal of the AMOLED
  • Keep inserting the card slowly while using alcohol as a de-bonder and lubricant as well as keeping uniform hot air blowing on the screen. While holding the outside of the glass continue rocking the card back and forth until the AMOLED is completely separated.

Continúe insertando la tarjeta lentamente mientras usas alcohol como desligante y lubricante, además de mantener un soplo uniforme de aire caliente en la pantalla. Mientras sostienes la parte exterior del vidrio, continúa moviendo la tarjeta hacia adelante y hacia atrás hasta que la AMOLED se separe por completo.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.