Repareer je spullen Gemeenschap Winkel

Apple Watch 42mm Glass Digitizer Only Replacement

Terug naar de handleiding
Engels
Nederlands
Stap 4
Apple Watch 42mm Glass Digitizer Only Replacement, Separating the Digi flex from the LCD: stap 0, afbeelding 1 van 2 Apple Watch 42mm Glass Digitizer Only Replacement, Separating the Digi flex from the LCD: stap 0, afbeelding 2 van 2
Separating the Digi flex from the LCD

  • After desoldering use a plastic spudger in the exact area as the picture shows to loosen up the adhesive holding the digi flex in place. It's best if you use a small amount of heat, around 150F, to help soften the adhesive bond. Fold the digi cable back as shown in the second picture.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.