Skip to main content
Step 4
If the button panel is broken, use a flathead screwdriver to pry the button panel from the back of the front panel.
  • If the button panel is broken, use a flathead screwdriver to pry the button panel from the back of the front panel.

  • With strong plastic adhesive, glue the new button panel into place with each button in it's designated button slot.

  • Allow the adhesive time to properly dry before pressing buttons.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.