Skip to main content
Step 2
The charger consist of a standard wallwart, output 14.4V 350mA, along with a little block (weighing nothing at all) to connect to one of the battery packs. To open the charger block, unscrew three #1 Phillips screws. To open the charger block, unscrew three #1 Phillips screws.
  • The charger consist of a standard wallwart, output 14.4V 350mA, along with a little block (weighing nothing at all) to connect to one of the battery packs.

  • To open the charger block, unscrew three #1 Phillips screws.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.