Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 4 handleidingen die deze stap bevatten.

Stap 2
Lift the trackpad cable up off the battery to separate it from the adhesive securing it. Be careful not to damage the cable. If it doesn't peel up easily, apply a little heat from an iOpener, heat gun, or hair dryer to soften the adhesive, and try again.
  • Lift the trackpad cable up off the battery to separate it from the adhesive securing it.

  • Be careful not to damage the cable. If it doesn't peel up easily, apply a little heat from an iOpener, heat gun, or hair dryer to soften the adhesive, and try again.

Solleva il cavo del trackpad allontanandolo dalla batteria per separarlo dall'adesivo che lo tiene in posizione.

Fai attenzione a non danneggiare il cavo. Se non dovesse staccarsi facilmente, applica un po’ di calore con un iOpener, una pistola termica o un asciugacapelli per ammorbidire l’adesivo e poi riprova.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.