Ga door naar hoofdinhoud

Retina MacBook 2015 下部ケースアセンブリの開口

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 12 handleidingen die deze stap bevatten.

Stap 15
Retina MacBook 2015 Opening Lower Case Assembly: stap 0, afbeelding 1 van 2 Retina MacBook 2015 Opening Lower Case Assembly: stap 0, afbeelding 2 van 2
  • Use the flat end of a spudger to disconnect the USB-C port cable bracket by prying it straight up from the logic board.

  • To reconnect this cable, first line up the metal bracket over the screw holes, then press down on the middle of the bracket. Make sure it's aligned correctly, or you may damage the connector.

スパッジャーの平らな端を使って、USB-Cポートケーブルブラケットをロジックボードからまっすぐ持ち上げて外します。

このケーブルを再接続するには、最初に金属製ブラケットをネジ穴に合わせてから、ブラケットの中央を押し下げます。 正しく位置合わせされていることを確認してください。さもなくば、コネクタが損傷する場合があります。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.