Ga door naar hoofdinhoud

Retina MacBook 2015 下部ケースアセンブリの開口

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 12 handleidingen die deze stap bevatten.

Stap 12
Retina MacBook 2015 Opening Lower Case Assembly: stap 0, afbeelding 1 van 2 Retina MacBook 2015 Opening Lower Case Assembly: stap 0, afbeelding 2 van 2
  • Remove the single 2.9 mm T5 Torx screw securing the battery connector to the logic board.

  • 2015 models have a silver grounding clip with two foam pads directly under this screw, which may come loose. Be sure to reinstall it during reassembly.

バッテリーコネクタをロジックボードに固定している2.9 mmのT5トルクスネジを1本取り外します。

2015年モデルには、このネジの真下に2つの発泡体パッドが付いたシルバーのアースクリップがあり、緩むことがあります。再組み立て中に必ず再組み込みしてください。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.