Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Engels
Nederlands
Stap 4
Locate the camera module. Grab the sides of the camera module and gently pull upwards to free it from the case. Be gentle when handling the camera module to avoid damaging the fragile ribbon cable attached to it.
Removing the Camera Module
  • Locate the camera module.

  • Grab the sides of the camera module and gently pull upwards to free it from the case.

  • Be gentle when handling the camera module to avoid damaging the fragile ribbon cable attached to it.

  • Use your finger to pull up the black tab on the rear of the ribbon cable connector.

  • Slide the ribbon cable out of the connector to remove the camera module.

  • When plugging the ribbon cable back into the connector the copper pads face upwards.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.